Conveyor System
 |
| Conveyor System |
|
|
|
| Written by Anuradha Panda | |
| Wednesday, 19 July 2006 | |
|
CONVEYOR SYSTEM
Conveyor System A conveyor system is like a central nervous system for your operation - it must run efficiently so everything else can. Businesses that ship, receive, store, handle, manufacture, or distribute as a core part of their mission know that a conveyor system can become nothing less than their operation's physical nervous system; the one thing that must operate for everything else to function. World-class material handling conveyor systems design requires a high level of knowledge and experience. Conveyor systems must be scalable; they have to take your future into as much account as your present. Well implemented conveyor systems make a positive difference in efficiency, safety, and profitability for manufacturing and distribution operations. What are you conveying? You should consult a conveyor professional when designing conveyor systems to ensure you get the right equipment for your application. Productivity and profits are directly related to the proper selection and application of material handling equipment. However, before hardware can be selected properly, the following criteria must be studied and defined carefully: 1- Load data (physical properties of the product to be handled) 2- Objectives of the application (what is to be accomplished with the equipment?) 3- Probably the most common error in selecting transfer mechanisms -- or conveyors -- is the fact that load data and application objectives are not studied in enough detail. In many cases, they are ignored completely and hardware is selected on an arbitrary basis or, worse yet, on a "lowest cost" basis. 4- Physical characteristics of the load that must be considered are as follows: Shape or form. The load must be defined as pallet, box, drum, wire container, engine block, beer bottle, coal, automatic body, or other item. 5- Dimensions. If the load is a container such as a pallet, box, or tote, its length, width, and height must be known. If it is a unit item, the dimensions of the interface between product and conveyor -- such as the load bearing surface -- are critical. 6- And, in the case of a product on a container -- such as a pallet load of beer cases -- the dimensions of both the carrier and the load on the carrier must be known in order to provide for such factors as overhung clearance. 7- Finally, if the load consists of bulk materials, such factors as density and flow rate must be identified. 8- Weight. Maximum and minimum, filled and empty, weights of the load must be known if it is a container. 9- Flow rate. The rate of flow or capacity of a system is usually stated in units per minute if a unit handling conveyor is used. Normal measurements of rate or capacity in bulk handling applications are cubic feet per minute or tons per hour. 10- Ambiguous terms such as average rate or throughput capacity should generally be avoided. The rate usually varies in different areas of a material handling system. However, there is always one point -- usually an intersection or junction -- that acts as a bottleneck, and hence controls the rate of the entire system. This point must be identified, because it is a controlling factor in overall system design and hardware selection. The speed of an individual conveyor may have nothing to do with the rate or capacity of a system, except that the conveyor must be capable of handling the maximum required total load-feet per minute. 11- Orientation. The position of the load on the conveyor must be established. A load length may actually become a height when the item is placed on a conveyor, tow line, or monorail carrier. 12- Footprint. The bottom configuration, or footprint, of a load can have a strong bearing on the design and cost of a conveyor system. The following questions should be asked about footprints of different types of loads: a- Pallet -- Are there block feet or runners? In which direction? Are there any broken boards, protruding nail heads, or straps? b- Drum -- Are there chines? Does the bottom bulge outward? c- Carton -- Is there a soggy bottom? Are there protruding staples? d- Casting -- Does it have irregular shapes? Is the surface machined? Does it have sharp edges or burrs? e- Steel shape -- Is the bottom surface flat, or is it warped? Is weld splatter present? f- Container -- Does it have feet? Is there a full-faced bottom? Is it flat or does it have sharp edges? Are ribs or runners used? Is weld splatter present? g- Bag -- Is the bottom flat, or is the shape like that of a bag of water? 13- Objectives of the system should be evaluated on a step-by-step, component-by-component basis. The purpose of each item of hardware should be questioned. For example, is transportation the primary purpose of a certain conveyor, or is it accumulation and surging? Is the conveyor to be used as a moving assembly work table? Can it be combined with an adjacent conveyor to eliminate a separate drive? |
|
| Last Updated ( Thursday, 07 September 2006 ) |
